Skip to content
PixDrive

LED-Player-ME configurator

Creates the _CONFIG_ file for the SD card of your DIAMEX LED-Player-ME. It checks the limits and shows you the wiring before you build it.

Based on manual v1.3 (08/22). Runs only in your browser, nothing is uploaded.

Device & LEDs

Device version
Only used to check the limits, does not go into the file.
LED type
RGB: WS2811/12, SK6812 · RGBW: SK6812 RGBW

Layout

If you export from PixDrive Studio, choose Strip here: you set up the matrix there as a fixture and PixDrive Studio handles the pixel mapping. Matrix is meant for files that contain an image line by line from the top left.

M_PANELS · Panels horizontal × vertical
×
Max. 4, one panel per output.
M_LEDS · LEDs per panel x × y
×
M_ORDER · Wiring inside a panel
M_BEGIN · Position of the first LED
M_MIRROR · Mirror the whole image

All panels must be built and oriented the same way. The preview assumes: CH1 = top left panel, further panels to the right line by line, then down.

Playback

BRIGHT · Brightness (SD card and USB)
%
FPS · Frame rate, same as in the export
fps
BLACKOUT · all LEDs off …
STOP · wait for a button press …

System & inputs

Files (FILE entries)

Empty fields = default from the configuration. C count (0 = endless) · B brightness % · F fps · S stop · O blackout · N number for the Ext inputs (1–31). When you choose files, the configurator only reads the TPM2 header to show the LED count and running time.

Check

    Key figures

    _CONFIG_

    The file name must be exactly _CONFIG_, without an extension, in the root directory of the microSD card (SD/SDHC, FAT16/FAT32, max. 32 GB). If your browser adds an extension like .txt, remove it. The player takes values you leave out from its stored state.
    From the sequence to the SD card
    1. Export the sequence in PixDrive Studio: format TPM2 Serial, the same frame rate as set here.
    2. Rename the exported file to .TP2 and copy it to the root directory of the microSD card.
    3. Download _CONFIG_ here and put it next to the file, without an extension.
    4. Insert the card into the player. With AUTOSTART=1, playback starts right away.
    The full guide is in the article TPM2 export for DIAMEX LED players.
    DIAMEX and LED-Player-ME belong to their respective owners. This configurator is an independent tool by PixDrive, not an official DIAMEX product. The authoritative source is the LED-Player-ME manual.
    Build the show for the player in PixDrive Studio
    Place effects on the timeline, export as TPM2 and play it without a computer.
    Download for free
    The TPM2 export is part of the sequencer and requires a license.